- May 17, 2017 at 7:21 pm #19770
- May 18, 2017 at 1:50 pm #19780KingKreftParticipantBasic | Dominant
Where would I find the way to make this?
- May 18, 2017 at 2:38 pm #19781
I just kinda winged it. I want to make another ones so I will post instructions when I do. I’ll try to do it tonight or tomorrow for you.
- May 18, 2017 at 3:09 pm #19782sirParticipantBasic | Dominant
I have made a few floggers and what makes them nice is making sure the handle is balanced. I add weight to the flogger handle so it does not feel cheap and swings properly. If the flogger is not balanced your falls will spread out all over the place when swinging it.
To do this I will use an 8 inch long, 3/4 inch thick, wood dowel for the handle. I drill out the centre of the dowel with a 5/16 drill bit and fill it full of buckshot or pellet gun BB’s. I Then fill it full of carpenters glue so when I’m swinging the flogger I don’t hear the steelies banging around. This adds weight to the flogger to make it heavier. You can also melt lead and fill it full of lead if you have that technology.
To find out if your flogger is properly balanced, you put the top of the handle on your pointer finger and let the falls hang down. It should balance on your finger if properly balanced.
I then finish my handle with leather.
- May 18, 2017 at 4:11 pm #19783
Thanks for the information. This is the only one I have made so. I want to make another with paracord and I want one with leather falls. I will try your technique.
- May 22, 2017 at 8:52 pm #19802
Kingkreft here is how I made the flogger. I started with about 25 ft of paracord and made (7) 18 in loops (photo 1).
I then found the starting point for my handle (I chose 6 1/2 in handle) and tied a simple knot.
Then start wrapping the cord to the end pulling the cord as tight as you can to make the handle firm.
Once I got to the end I kept wrapping on top of the first layer to give the handle some thickness and make it even firmer.
Once I was done wrapping the cord I put a wide wrap down the handle just for looks and finished off at the bottom of the handle. I tied a knot onto one of the loops and burned the end to keep it from slipping.
Now just cut the loops in half and burn the ends( I like to let them burn alittle to build a nice hard bead on the end.
hope this helps.
- November 16, 2017 at 10:30 am #69823Mr. Fox | Founder D/s-MKeymasterPremium Content | Through the Eyes of a husDOM™
Mr K Sir,
What a great short tutorial and pictures on how to make a paranoid flogger…
I am certain that it will help many begin to create some of their own toys.
Thanks for sharing this with everyone.
- May 23, 2017 at 6:12 pm #19813KingKreftParticipantBasic | Dominant
Thanks for the info in my line of work I have alot of access to 550 cord so I will be making this soon.
- November 16, 2017 at 1:55 am #69818
You must be logged in to reply to this topic.